How to keep your laptop cool and avoid overheating your computer especially in the summer when it’s hotter
Every summer, the same problem arises: laptops overheat which become almost red-hot and spin the fans to maximum to try to lower the temperature. The problem is that too much heat ruins the electronic components of the computer, especially the batteries and hard drives with all the data inside. Electronic components generate heat when they are turned on and, in summer, they generate more because the outside temperature is also high.
Without neglecting the problem, it is worth taking some precautions to keep the laptop cool and prevent the temperature from rising to such an extent that the computer suddenly shuts down.
All computers heat up, but for laptops the matter is more delicate. There are two main reasons laptops have more of an overheating problem.
Meanwhile, since laptops are smaller than desktop PCs, electronics are closer together and tucked into plastic, with much less room for heat to escape. The other reason is the power requirement, very high in some laptops where programs that require full use of the processor are run. Of course, laptop manufacturers know these problems exist and use fans, heat sinks, and vents to cool the computer when it gets to work. Dust, some small malfunctions or misuse, however, can frustrate every effort. One of the best ways to keep your laptop cool from overheating is to simply take care of it.
If the PC is generating a lot of heat and if the fans are running fast and activating at shorter and shorter intervals, you must immediately check if they are working as they should or if there is any malfunction. On the websites of some laptop manufacturers there are diagnostic tools to do this type of checks. Searching Google, for example, for the words tool diagnostic fan, you can find links to the fan diagnostic tools of Toshiba, HP, Intel, Dell, Vaio and others laptops.
Alternatively, you can check the operation of the fans with HWMonitor, a small information program.
CoreTemp: instead it is a program that monitors the temperature of the cores in the processor. You might notice with this tool how the processor temperature rises during intensive use of games or graphics programs and how, in severe cases, when the temperature rises to 90 degrees, the PC shuts down by itself.
Speed fan, on the other hand, is a program that serves, in addition to controlling the temperatures and speeds of the fans, also to adjust the speed of the fans by asking them to ensure that they are always at maximum, which is however not recommended.
2) Air intakes
Cleaning the air intakes of dust is the first thing to do when temperatures rise. The suction vents must be open and unobstructed otherwise the heat cannot escape from the inside. The easiest way to clean the laptop’s openings is to use a can of compressed air found at any office supply store. You can also use a slightly damp (not wet) cloth on the vents.
A bad laptop cooling system can also be down to the computer’s BIOS which may not be optimized. It would therefore be worth checking if there were any BIOS updates on the manufacturer’s site. Since the BIOS is a delicate part of the computer, if you don’t have a bit of experience, it’s best not to touch it.
4) Bad use
Many times it happens to pick up the laptop and place it on the legs while sitting in bed or on the sofa or, even worse, to place it on a blanket or a soft surface. In these cases the soft surface covers the vents so inevitably the computer will quickly overheat or even burn itself (thankfully it turns itself off when it reaches melting temperatures).
5) Cooling Bases
Heat build-up can also occur when the laptop is resting on a regular desk, with all fans and vents working well. To keep the laptop cool in any situation, there are supports that create space between the surface and the computer in order to facilitate the dispersion of heat. These holders may also have a fan underneath which ensures safe cooling of the laptop.
These cooling bases can be bought on https://amazon.com for a few dollars, and are one of the most recommended purchases, especially in the summer.
One thing to remember is that laptop heat dissipation or loss is constantly changing and changing with age, environment and power consumption. So, even if last year everything was working well while this year the PC base seems warmer, we should not be too surprised and we must immediately find adequate solutions before something can be broken.
6) On modern laptops it is also possible to keep the computer cool by using the overclocking or power management options. You can use these options using the proprietary management program (for example that of ASUS) which is already installed and which allows you to decrease the processor power so that it drains less battery and, consequently, so that it does not get too hot.
Failing that, you can go to the Windows 10 Control Panel to find Power Options, where you can use a balanced power plan instead of a high performance one.
7) Fanless Laptops: There are “fanless laptops” manufactured by different companies with the help of latest technology, maybe a few people think that the best fanless laptops might get warm, during operations, No, No, absolutely Not, Such Laptops manufactured with latest technology, using “coolant” or manufacturing material that maintains temperature of laptop.