Free tool

Refresh Rate Test: Check Your Monitor Hz and Ghosting Online

This refresh rate test shows how many times per second your screen updates, measured live in your browser. Below the result, moving blocks at three speeds let you check your monitor for ghosting.

Updated

Your refresh rate

Measuring...

Measured
...
Frame time
...
Late frames
...
Speed
Background

Watch the moving blocks. A blurred trail behind them is ghosting. A bright or dark outline that was not there before is overshoot. Keep this tab in front while it measures.

How the refresh rate test works

Your browser draws a new frame each time the screen refreshes. According to MDN's documentation of requestAnimationFrame, the rate of these frames generally matches the display refresh rate. The test times the gap between frames, ignores the odd slow frame, and turns the average gap into hertz. A 60 Hz screen gives about 16.67 ms per frame, a 144 Hz screen about 6.94 ms.

  • Your refresh rate is the measured rate rounded to the nearest standard rate, such as 60, 120, 144 or 240 Hz.
  • Measured is the raw figure. It can sit a fraction away from the standard rate, for example 59.9 Hz on a 60 Hz screen.
  • Late frames is the share of frames that took at least 1.5 times longer than normal. A few percent is normal while the page loads. A high figure means the PC or browser is busy.

Browsers pause this kind of drawing in background tabs, so keep the tab in front. If you have two monitors, the result is for the monitor the browser window is on. Move the window and select Measure again to test the other one.

Why the test shows 60 Hz on a 144 Hz monitor

A high refresh rate monitor often runs at 60 Hz until you change it in Windows. Windows lists only the rates your display supports, so if 144 Hz is missing from the list, check the monitor's manual for the cable and port it needs to run at that rate.

On Windows 11, a laptop with Dynamic Refresh Rate turned on can switch between rates on its own. Microsoft notes that Dynamic Refresh Rate needs a display that supports variable refresh rate and at least 120 Hz.

How to change the refresh rate in Windows 11

  1. Select Start > Settings > System > Display > Advanced display.
  2. Select the rate you want next to Choose a refresh rate.
  3. Come back to this page and select Measure again to confirm the new rate.

Rates marked with an asterisk (*) do not support your current resolution, so choosing one also changes the resolution. The Dynamic refresh rate toggle is on the same page. These steps follow Microsoft's guide to changing the refresh rate on your monitor in Windows.

How to use the ghosting test

Ghosting is a faint trail behind moving objects. It happens when the screen's pixels change colour more slowly than the image moves. To check for it:

  1. Look at the fastest row and follow one block with your eyes as it moves.
  2. Switch between the dark, grey and light backgrounds. Ghosting often shows on one and not the others.
  3. Compare the three speeds. The px per frame figure shows how far each block jumps between refreshes.

A smeared trail is ghosting. A bright or dark outline that follows the block is overshoot, which is usually caused by a response time or overdrive setting turned up too far.

How to reduce ghosting

  • Run the monitor at its highest supported refresh rate first, using the steps above.
  • Open the monitor's on-screen menu and find its response time or overdrive setting. The name differs between brands.
  • Raise it one step at a time and check the test after each change. Stop at the step before outlines appear.
  • If the trail never goes away on any setting, the panel itself is slow. That is normal on some older or budget monitors and is not a fault.

If your screen flickers, goes black or shows a display driver error instead, see our guide to fixing VIDEO_TDR_FAILURE in Windows.

FAQ

Is an online refresh rate test accurate?

When the browser is not busy, the reading is usually within 1 Hz of the real rate, because it averages real frames over several seconds. Close heavy tabs and keep the window in front for the steadiest reading.

Why does the number change slightly?

Each frame takes a tiny bit more or less time than the last, and the test updates a few times a second. The rounded figure should stay the same. If it jumps between two rates, something on the PC is slowing the browser down.

Can the test show more than 60 Hz?

Yes. Browsers generally draw at the screen's refresh rate, so a 120, 144 or 240 Hz monitor shows that rate here once Windows is set to it.

Does this test work on phones and tablets?

Yes, it runs in any modern browser. The result is the rate the browser is drawing at, which on some devices can be lower than the screen's maximum.