Revert a Bootable USB Back to Normal

If you have ever booted your computer from a USB stick, you may have noticed that even after formatting the USB you don't get all the space back. This is because of the partition created when you make a USB bootable. In this article we will explain how to revert a bootable USB back to normal so that you can use its full space.
There are many ways to do this, but in this article we will go through the procedure using the diskpart feature of Windows. The process is fairly easy, so follow these steps and free up your USB again.
Also check: Microsoft Office features for free
- First, open the command prompt. Click the Start button and search for command prompt. Or simply use the shortcut Windows+R to open Run, type cmd and press Enter.
- In the command prompt window, type diskpart and press Enter.
- Type list disk in the diskpart window. You can recognize your USB by its storage capacity. Be careful in this step, because you can erase your hard disk if you select it instead of your USB 3.1 flash drive. Usually your USB will be disk 1, but if you are using more than one hard disk, or a combination of HDD and SSD, it will be disk 2. So check carefully which disk you are choosing, and never select disk 0.
- Now run the following commands in order:
select disk 2 Select your USB disk after identifying it as explained above.
clean
create partition primary
format fs=fat32 quick This command formats the pen drive.
exit This closes diskpart.
Finally, format your USB again and it is as good as new. We hope you liked this article. If you have any questions, feel free to comment. Also leave a like on our Facebook page.



